Vibration analyzer kit HD2070.K1 Senseca Việt Nam
HD2070.K1 là bộ thiết bị phân tích độ rung 3 kênh của thương hiệu Senseca (trước đây là Delta OHM), được thiết kế để đo lường, giám sát và phân tích rung động trong môi trường công nghiệp, công trình xây dựng và an toàn lao động.
Thiết bị cho phép đo đồng thời ba trục rung động, hỗ trợ ghi dữ liệu, lưu trữ kết quả và phân tích các thông số rung nhằm đánh giá mức độ rung, kiểm soát điều kiện làm việc và phát hiện những bất thường trong quá trình vận hành.
1. Thông số kỹ thuật
| Thông số | Đặc điểm |
|---|---|
| Model | HD2070.K1 |
| Thương hiệu | Senseca / Delta OHM |
| Loại thiết bị | Vibration Analyzer |
| Số kênh đo | 3 kênh độc lập |
| Cảm biến tương thích | IEPE Accelerometers |
| Đo rung | 3 trục X, Y, Z |
| Lưu trữ dữ liệu | Thẻ nhớ SD |
| Ghi chú âm thanh | Có |
| Giao tiếp | USB / RS232 |
| Phần mềm | Noise Studio |
| Tiêu chuẩn | ISO 8041, ISO 5349, ISO 2631 |
| Hiệu chuẩn | Báo cáo hiệu chuẩn theo ISO 8041 |
2. Đặc điểm nổi bật
Đo rung 3 kênh đồng thời: Theo dõi rung động trên ba trục, phục vụ đánh giá toàn diện.
Phân tích và lưu trữ dữ liệu: Ghi nhận kết quả đo trên thẻ nhớ SD, hỗ trợ truy xuất và đánh giá sau đo.
Ghi chú bằng giọng nói: Cho phép lưu lại nhận xét liên quan đến từng phép đo.
Kết nối máy tính: Sử dụng phần mềm Noise Studio để quản lý và xử lý dữ liệu.
Khả năng mở rộng: Hỗ trợ các tùy chọn phân tích phổ, phân tích thống kê và ghi tín hiệu số
LIST CODE
1 100% Singapore Origin HUKX VietNam Model: SR05-D1A3-03
Digital spectrally flat Class C (second class) pyranometer, with Modbus over RS-485 and 0-1 V output, and 3 m cable2 100% Singapore Origin HUKX VietNam Model: BL01
Ball-levelling for Levelling of SR051 100% Italy Origin Senseca
(Delta Ohm/ GHM) VietnamDelta Ohm Vietnam / GHM Vietnam
Code: HD2070.HA-WB Vibration Measurement System
Kit to measure vibrations and evaluate exposure to hand-arm system and whole body according to ISO 5349 and ISO 2631.The kit is Composed by the following codes:
– HD2070.K1 – 3-channel vibration analyzer
– HDP356A02 – ICP tri-axial accelerometer
– HD2030.CAB3-3M – connection cable for HDP356A02
– HD2030.124 – hand arm adapters kit
– HD2030MSP – IEPE tri-axial accelerometer with seat adapter
– HD2030.CAB3M-2M – connection cable for HD2030MSP
NOTE: HD2030PAD nằm trong HD2030MSPTuyChon
1.1100% Italy Origin Senseca
(Delta Ohm/ GHM) VietnamCode: HDBV-1000
IEPE tri-axial high sensitivity accelerometer. Using the mounting kit (included) the accelerometer can be used in combination with HD2030AC5 floor measurement adapter.
Includes:
• Mounting Kit for HD2030AC5
• Calibration chartTuyChon
1.2100% Italy Origin Senseca
(Delta Ohm/ GHM) VietnamCode: HD2030.CAB3M-5M
Cable for connection of tri-axial accelerometers with 4pin M5 connector. Length 5 m, equipped with the following connectors:
• Accelerometer side: multipolar M5 4 pin
• Instrument side: multipolar circular push-pull 4-pin connectorTuyChon
1.3100% Italy Origin Senseca
(Delta Ohm/ GHM) VietnamCode: HD2030AC5
IEPE tri-axial high sensitivity accelerometer. Using the mounting kit (included) the accelerometer can be used in combination with HD2030AC5 floor measurement adapter.
Includes:
• Mounting Kit for HD2030AC5
• Calibration chart2 100% Italy Origin Senseca
(Delta Ohm/ GHM) VietnamCode: HD2030AC1
Cube-shaped adapter
Includes:
• 10-32 UNF cylindrical head with hex socket screw with 4 mm hex key
• 5-40 UNC cylindrical head with hex socket screw with 4 mm hex key
• 10 cable-ties, width 4.5 mm, length 200 mm
• 1 metallic clamp, width 9 mm3 100% Italy Origin Senseca
(Delta Ohm/ GHM) VietnamCode: HD2030AC2 Adapter
Adapter for the mounting of the accelerometers
Includes:
• 10-32 UNF cylindrical head with hex socket screw with 4 mm hex key
• 5-40 UNC cylindrical head with hex socket screw with 4 mm hex key
• 10 cable-ties, width 4.5 mm, length 200 mm
• HD2030FV: 2 velcro straps, width 25 mm, length 300 mm4 100% Italy Origin Senseca
(Delta Ohm/ GHM) VietnamCode: HDP356A02 Accelerometer
ICP tri-axial accelerometer for the measurement of the vibrations transmitted to the hand-arm system
Includes:
• 081B05 10-32 UNF copper-beryllium alloy mounting screw
• M081B05 M6 copper-beryllium alloy mounting screw
• ACS-1T Manufacturer’s calibration card
NOTE: HDP356A02 is included in HD2070.HA-WBTuyChon
5100% Italy Origin Senseca
(Delta Ohm/ GHM) VietnamCode: HD2070.O1
“Spectral analysis”: measurement of the acceleration spectrum in octave bands from 0.5 Hz to 2 kHz and third octave bands from 0.5 Hz to 3.15 kHz class 1 according to IEC 61260. ISO9001 calibration report according to IEC 61260 of both banks included.TuyChon
6100% Italy Origin Senseca
(Delta Ohm/ GHM) VietnamCode: HD2070.O2
“Statistical analysis”: acceleration probability distribution graph and calculation of the percentile levels from L1 to L99 in 1 dB classes.



Đánh giá
Chưa có đánh giá nào.