Bộ điều khiển C10-4DM SINFONIA Việt Nam

Thông tin liên hệ

Ms. Như

sales@qc-master.com

0373 238 670

Model		C10-4DM
Input power		AC200-230V　±10%　50/60Hz
Control system		PWM system
Output	Voltage	0~190V
	Vibration frequency	28~45Hz, 65~120Hz, 90~180Hz
	Max. current	horizontal: 4A vertical: 2A
Oparating mode	Standard drive	Automatic tuning to horizontal resonance point. By amplitude phase control without frequency setting
Additional features	Constant phase difference control	Horizontal/vertical amplitude phase difference kept constant
	Speed selection	Choice of 4 pre-set speeds by external signal
	Start/Stop control	Stops and starts by external signal
	Output signal	Outputs signal tuned to unit operation
	Soft start	Start-up time 0.2~4.0 seconds
	On/Off delay timer	Delay time 0.2~60 seconds
	Sensor power source	3P power plug gives DC12V, max. 80mA
Synchronized power source	Function	Power source synchronized to parts feeder operation (RUN)
	Control system	On/Off control through a triac
	Output voltage	As power source input to controller
Other	Max. current	2A
	Noise resistant voltage	Above 1000V
	Ambient temperature range	0~40℃
	Ambient humidity range	10~90% (No condensation)
	Applicable Space	Indoor (Place where no corrosive gas, and dust.)
	Color of case	Japan Paint Industry Association U75-70D
	Weight	2.0kg
Compatible equipment		DM-30C, 38C, 45C, 65C DMS-15C, 20C, 25C, 30C, 38C, 45C

LIST CODE

1	100% Japan Origin	SINFONIA Vietnam	Model: DM-65C Dual Motion Parts Feeder Smooth, low-noise conveyance
2	100% Japan Origin	SINFONIA Vietnam	Model: C10-4DM Controller Simple and easy start up
1	100% USA Origin	Temposonics/MTS Vietnam	Code: RH5MA0190M01H051A130 Temposonics® R-Serie
2	100% USA Origin	Temposonics/MTS Vietnam	Code: 201542-2 33mm OD magnet